Skip to content
If you're a proud owner of Air, Aeropex, or Titanium headphones, then you probably already know that they're equipped with a multipoint pairing feature -- a fun little perk that previous models didn’t have.
Multipoint pairing allows you to be connected to two Bluetooth devices at the same time. While you won’t receive input from both devices at the same time, you’ll be able to seamlessly transition from one device to the other. So if you’re listening to music on your laptop, and your cell phone rings, all you’ll have to do is click a button to answer the call.
If you’ve already connected your bone conduction headphones to a device, you’ll want to manually reset the headphones and clear/forget the headphones from your device before you get started.
Ready to try it out?
1) Start with your AfterShokz headphones turned off.
2) Enter pairing mode by pressing and holding the power/volume+ button for 5-7 seconds. Audrey will say “Welcome to Titanium! (or Aeropex, or Air)" and then “pairing” and the LED light will then flash red and blue.
3) Press and hold the multifunction button and power/volume+ button at the same time for 2-3 seconds. Audrey will say "Multipoint Enabled."
4) In your first device’s Bluetooth settings, select your AfterShokz headphones model. Audrey will say "Connected."
5) Turn your headphones off.
6) Re-enter pairing mode by pressing and holding the power/volume+ button for 5-7 seconds. Audrey will say “Welcome to Titanium!” and then “pairing” and then the LED light will flash red and blue.
7) In your second device’s Bluetooth settings, select the Titanium (or whatever model you're using). Audrey will say "Connected" or “Device 2 Connected.”
8) Turn your headphones off.
That completes the multipoint pairing process! With a little help from Bluetooth technology, your headphones should now be connected to two of your devices simultaneously the next time you turn them on.
Are you a visual learner? Check out our YouTube video on how to enable multipoint pairing.
For more assistance, please click on the help widget below.
